But the result is not as good as on non metallic colors. Yes, the Montana CRACKLE 400ml spray will work on metallic colors. Will the Montana CRACKLE 400ml spray work with metallic colors?
#Patina green color spray paint crack#
The more evenly and regular it was applied, the more even and consistent the crack formation will be. Variables like the amount of time application of the Montana CRACKLE 400ml spray to the base coat, the color of the base coat, the contents of the base coat and how evenly (or thick) the Montana CRACKLE 400ml spray was applied. The size and consistency of the cracking varies subject to many variables. How do I achieve the best cracks with my Montana CRACKLE 400ml spray? Generally it is possible to be dust dry after 15-20 mins, touch dry in 60 mins and cured after 24 hours. The drying time for Montana CRACKLE 400ml spray varies depending on the base coat under it, substrate, ambient temperature and levels of humidity. How long does Montana CRACKLE 400ml spray take to dry? Make sure to seal the surface completely ensuring no air holes are open on the foam's surface. Pre-priming with Montana Styrofoam PRIMER is required before application to polystyrene. Montana CRACKLE 400ml spray can be used on nearly any primed surfaces such as concrete, metal, wood, walls, hard plastics, primed carton and walls etc. Which surfaces can I use my CRACKLE 400ml spray on? If flowing freely you can start painting. Replace the cap back onto the top of the can valve and trigger away from substrate to test. Shake vigorously for 2-3 minutes ensuring you can hear the mixing balls moving freely. Strike with your palm allowing safety ring to fall out. Remove the spray nozzle and turn the can upside down. How do I start using my Montana CRACKLE 400ml spray can? Montana CRACKLE 400ml is best applied between 45 mins and 24 hours after the base color has been applied. The thicker the base coats applied, the greater the effect. Montana CRACKLE 400ml spray needs to be applied over another paint coating.The best results are achieved over Montana GOLD or WHITE colors. How does Montana CRACKLE 400ml spray work? Color shown by the donut on top of the can. The crackle effect is both aesthetic and can makes objects or artworks appear vintage or used. The Montana CRACKLE 400ml dries at a faster rate than the paint it is applied over, creating cracks during the drying process. Montana CRACKLE 400ml spray is a high pressure gloss paint coating, that is applied over other paints before they are completely dry. What is Montana CRACKLE 400ml spray and how does it work? Pure white (RAL 9010) and traffic black (RAL 9017). Available in the following colors: gentian blue (RAL 5010), patina green (RAL 6000), squirrel grey (RAL 7000), copper brown (RAL 8004),
Always test spray on a non-visible area to check compatibility of lacquer or paint. To achieve greater crackling effects, further application can be applied after 5 minutes.
Remove the safety ring by removing the nozzle and turning the can upside down allowing it to fall out. Shake can well for 2-3 minutes upside down to take advantage of gravity. Surfaces should be dry, clean of dust, oils and rust before varnish application. During application, protect the object and the surrounding area from spray mist. USE: Recommended working temperature is between +10☌ und +25☌. Pre Priming with Montana Styrofoam primer is required for application on polystyrene (make sure to seal the surface completely). The CRACKLE spray is high-covering and can be top-coated when fully dry and cured (after 24h) with Montana GOLD, Montana BLACK, Montana WHITE, Montana ACRYLIC markers as well as customary acrylic paints. After extensively applying CRACKLE Effect to your primed area, the distressing (cracking) process will begin to occur. Apply spray strokes from left to right in a crossing over motion (cross-coating) for best results. Give at least 45min but not more than 24hours drying time to the base coat before applying CRACKLE effect (drying time might vary due to temperature, humidity and thickness of coating). Prior coating of your object is necessary with colors of Montana GOLD (recommended) or Montana WHITE (the thicker the base coat the stronger the effect). CRACKLE EFFECT for the special crackle-look (e.g.
0 kommentar(er)
